Before proceeding too much farther into the remaining steps, it’s first necessary to confirm that the material in question is actually a solid piece of wood, and not a man-made composite or piece of plastic made to imitate wood. Can you see the end-grain? Manufactured wood such as MDF, OSB, and particleboard all have a distinct look that is—in nearly all cases—easily distinguishable from the endgrain of real wood. Look for growth rings—formed by the yearly growth of a tree—which will be a dead-giveaway that the wood sample in question is a solid, genuine chunk of wood taken from a tree. Is it veneered? If you see a large panel that has a repeating grain pattern, it may be a veneer. In such cases, a very thin layer of real wood is peeled from a tree and attached to a substrate; sometimes the veneer can be one continuous repeating piece because it is rotary-sliced to shave off the veneer layer as the tree trunk is spun by machines.
If there is even a chance that the color isn’t natural, the odds are increased that the entire effort of identifying the wood will be in vain. Many woods, when left outside in the elements, tend to turn a bland gray color. Also, even interior wood also takes on a patina as it ages: some woods get darker, or redder, and some even get lighter or lose their color; but for the most part, wood tends to darken with age. The most predictable baseline to use when identifying wood is in a freshly sanded state. This eliminates the chances of a stain or natural aging skewing the color diagnosis of the wood. Most softwoods will be almost perfectly smooth with no grain indentations, while many common hardwoods have an open pore structure, such as Oak or Mahogany; though there are some hardwoods that are also smooth to the touch, such as Maple. By observing the grain patterns, many times you can tell how the board was cut from the tree. Some wood species have dramatically different grain patterns from plainsawn to quartersawn surfaces. For instance, on their quartersawn surfaces, Lacewood has large lace patterns, Oak has flecks, and Maple has the characteristic “butcher block” appearance. Some species of wood have figure that is much more common than in other species: for example, curly figure is fairly common in Soft Maple, and the curls are usually well-pronounced and close together. Yet when Birch or Cherry has a curly grain, it is more often much less pronounced, and the curls are spaced farther apart.
the go-to destination for anyone who is passionate about design, architecture, luxury, lifestyle and creativity in the home. Those who visit the site are seeking inspiration to help them on their journey to creating their dream home as well as practical solutions to the problems that their homes may present. And don’t forget to follow us on gplus and like us on Facebook as that’s where the real conversation takes place. We’re waiting to hear from you!
© 2005-2017 azulbanana. Reproduction without explicit permission is prohibited. All Rights Reserved.